View FDPC8013S_6482696.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FDPC8013S powertrench ? power clip ?2012 fairchild semiconductor corporation FDPC8013S rev.c1 www.fairchildsemi.com 1 april 2012 FDPC8013S powertrench ? power clip 30 v asymmetric dual n-channel mosfet features q1: n-channel ? max r ds(on) = 9.6 m at v gs = 4.5 v, i d = 10 a q2: n-channel ? max r ds(on) = 2.7 m at v gs = 4.5 v, i d = 22 a ? low inductance packaging shortens rise/fall times, resulting in lower switching losses ? mosfet integration enables optimum layout for lower circuit inductance and reduced switch node ringing ? rohs compliant general description this device includes two specia lized n-channel mosfets in a dual package. the switch node has been internally connected to enable easy placement and r outing of synchronous buck converters. the control mosfet (q1) and synchronous syncfet tm (q2) have been designed to provide optimal power efficiency. applications ? computing ? communications ? general purpose point of load mosfet maximum ratings t a = 25 c unless otherwise noted thermal characteristics package marking and ordering information symbol parameter q1 q2 units v ds drain to source voltage 30 30 v v gs gate to source voltage (note 4) 20 20 v i d drain current -continuous (pack age limited) t c = 25 c 20 55 a -continuous t a = 25 c 13 1a 26 1b -pulsed 40 100 e as single pulse avalanche energy (note 3) 21 97 mj p d power dissipation for single operation t a = 25 c 1.6 1a 2.0 1b w power dissipation for single operation t a = 25 c 0.8 1c 0.9 1d t j , t stg operating and storage junction temperature range -55 to +150 c r ja thermal resistance, junction to ambient 77 1a 63 1b c/w r ja thermal resistance, junction to ambient 151 1c 135 1d r jc thermal resistance, junction to case 5.0 3.5 device marking device package reel size tape width quantity 13cf/15cf FDPC8013S power clip 33 13 ? 12 mm 3000 units top gnd (lss hsg sw sw sw bottom 3.3 mm x 3.3 mm pin 1 hsg sw sw sw v+ (hsd v+ ls gnd gnd pin 1 v+ lsg gnd gnd pad9 v+(hsd) pad10 gnd(lss) hsg sw sw sw sw v+ lsg gnd gnd
FDPC8013S powertrench ? power clip ?2012 fairchild semiconductor corporation FDPC8013S rev.c1 www.fairchildsemi.com 2 electrical characteristics t j = 25 c unless otherwise noted off characteristics on characteristics dynamic characteristics switching characteristics symbol parameter test conditions type min typ max units bv dss drain to source breakdown voltage i d = 250 a, v gs = 0 v i d = 1 ma, v gs = 0 v q1 q2 30 30 v bv dss t j breakdown voltage temperature coefficient i d = 250 a, referenced to 25 c i d = 10 ma, referenced to 25 c q1 q2 16 20 mv/c i dss zero gate voltage drain current v ds = 24 v, v gs = 0 v v ds = 24 v, v gs = 0 v q1 q2 1 500 a a i gss gate to source leakage current, forward v gs = 20 v, v ds = 0 v v gs = 20 v, v ds = 0 v q1 q2 100 100 na na v gs(th) gate to source threshold voltage v gs = v ds , i d = 250 a v gs = v ds , i d = 1 ma q1 q2 1.2 1.2 1.5 1.7 3.0 3.0 v v gs(th) t j gate to source threshold voltage temperature coefficient i d = 250 a, referenced to 25 c i d = 10 ma, referenced to 25 c q1 q2 -5 -6 mv/c r ds(on) drain to source on resistance v gs = 10 v, i d = 13 a v gs = 4.5 v, i d = 10 a v gs = 10 v, i d = 13 a,t j =125 c q1 4.6 6.7 6.6 6.4 9.6 9.2 m v gs = 10 v, i d = 26 a v gs = 4.5 v, i d = 22 a v gs = 10 v, i d = 26 a ,t j =125 c q2 1.4 2.0 1.9 1.9 2.7 2.6 g fs forward transconductance v ds = 5 v, i d = 13 a v ds = 5 v, i d = 26 a q1 q2 53 168 s c iss input capacitance q1: v ds = 15 v, v gs = 0 v, f = 1 mhz q2: v ds = 15 v, v gs = 0 v, f = 1 mhz q1 q2 827 2785 pf c oss output capacitance q1 q2 333 997 pf c rss reverse transfer capacitance q1 q2 44 128 pf r g gate resistance q1 q2 0.5 0.5 t d(on) turn-on delay time q1: v dd = 15 v, i d = 13 a, r gen = 6 q2: v dd = 15 v, i d = 26 a, r gen = 6 q1 q2 6 11 ns t r rise time q1 q2 2 5 ns t d(off) turn-off delay time q1 q2 16 30 ns t f fall time q1 q2 2 4 ns q g total gate charge v gs = 0 v to 10 v q1 v dd = 15 v, i d = 13 a q2 v dd = 15 v, i d = 26 a q1 q2 13 44 nc q g total gate charge v gs = 0 v to 4.5 v q1 q2 6 21 nc q gs gate to source gate charge q1 q2 2.2 7.2 nc q gd gate to drain ?miller? charge q1 q2 1.9 6.6 nc
FDPC8013S powertrench ? power clip ?2012 fairchild semiconductor corporation FDPC8013S rev.c1 www.fairchildsemi.com 3 electrical characteristics t j = 25 c unless otherwise noted drain-source diod e characteristics symbol parameter test conditions type min typ max units v sd source to drain diode forward voltage v gs = 0 v, i s = 13 a (note 2) v gs = 0 v, i s = 26 a (note 2) q1 q2 0.80 0.77 1.2 1.2 v t rr reverse recovery time q1 i f = 13 a, di/dt = 100 a/ s q2 i f = 26 a, di/dt = 300 a/ s q1 q2 22 29 ns q rr reverse recovery charge q1 q2 7 30 nc notes: 1.r ja is determined with the device mounted on a 1 in 2 pad 2 oz copper pad on a 1.5 x 1.5 in. board of fr-4 material. r jc is guaranteed by design while r ca is determined by the user's board design. 2 pulse test: pulse width < 300 s, duty cycle < 2.0%. 3. q1 :e as of 21 mj is based on starting t j = 25 o c; n-ch: l = 1.2 mh, i as = 6 a, v dd = 23 v, v gs = 10 v. 100% test at l= 0.1 mh, i as = 14.5 a. q2: e as of 97 mj is based on starting t j = 25 o c; n-ch: l = 0.6 mh, i as = 18 a, v dd = 23 v, v gs = 10 v. 100% test at l= 0.1 mh, i as = 32.9 a. 4. as an n-ch device, the negative v gs rating is for low duty cycle pulse occurence only. no continuous rating is implied. a. 77 c/w when mounted on a 1 in 2 pad of 2 oz copper c. 151 c/w when mounted on a minimum pad of 2 oz copper b. 63 c/w when mounted on a 1 in 2 pad of 2 oz copper d. 135 c/w when mounted on a minimum pad of 2 oz copper g df ds sf ss g df ds sf ss g df ds sf ss g df ds sf ss
FDPC8013S powertrench ? power clip ?2012 fairchild semiconductor corporation FDPC8013S rev.c1 www.fairchildsemi.com 4 typical characteristics (q1 n-channel) t j = 25 c unless otherwise noted figure 1. 0.0 0.3 0.6 0.9 1.2 1.5 0 10 20 30 40 v gs = 3 v v gs = 3 .5 v v gs = 10 v v gs = 6 v v gs = 4.5 v pulse duration = 80 p s duty cycle = 0.5% max i d , drain current (a) v ds , drain to source voltage (v) on region characteristics f i g u r e 2 . 0 10203040 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 v gs = 3 v v gs = 6 v v gs = 4.5 v pulse duration = 80 p s duty cycle = 0.5% max normalized drain to source on-resistance i d , drain current (a) v gs = 3.5 v v gs = 10 v n o r m a l i z e d o n - r e s i s t a n c e vs drain current and gate voltage f i g u r e 3 . n o r m a l i z e d o n r e s i s t a n c e -75 -50 -25 0 25 50 75 100 125 150 0.6 0.8 1.0 1.2 1.4 1.6 i d = 13 a v gs = 10 v normalized drain to source on-resistance t j , junction temperature ( o c ) vs junction temperature figure 4. 2345678910 0 7 14 21 28 35 t j = 125 o c i d = 13 a t j = 25 o c v gs , gate to source voltage (v) r ds(on) , drain to source on-resistance ( m : ) pulse duration = 80 p s duty cycle = 0.5% max o n - r e s i s t a n c e v s g a t e t o source voltage figure 5. transfer characteristics 1.0 1.5 2.0 2.5 3.0 3.5 0 10 20 30 40 t j = 150 o c v ds = 5 v pulse duration = 80 p s duty cycle = 0.5% max t j = -55 o c t j = 25 o c i d , drain current (a) v gs , gate to source voltage (v) figure 6. 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0.01 0.1 1 10 40 t j = -55 o c t j = 25 o c t j = 150 o c v gs = 0 v i s , reverse drain current (a) v sd , body diode forward voltage (v) s o u r c e t o d r a i n d i o d e forward voltage vs source current
FDPC8013S powertrench ? power clip ?2012 fairchild semiconductor corporation FDPC8013S rev.c1 www.fairchildsemi.com 5 figure 7. 03691215 0 2 4 6 8 10 i d = 13 a v dd = 15 v v dd = 10 v v gs , gate to source voltage (v) q g , gate charge (nc) v dd = 20 v gate charge characteristics figure 8. 0.1 1 10 30 10 100 1000 2000 f = 1 mhz v gs = 0 v capacitance (pf) v ds , drain to source voltage (v) c rss c oss c iss c a p a c i t a n c e v s d r a i n to source voltage figure 9. 0.001 0.01 0.1 1 10 50 1 10 50 t j = 100 o c t j = 25 o c t j = 125 o c t av , time in avalanche (ms) i as , avalanche current (a) u n c l a m p e d i n d u c t i v e switching capability figure 10. maximum continuous drain cur rent vs. ambient temperature 25 50 75 100 125 150 0 10 20 30 40 50 60 r t jc = 5.0 o c/w v gs = 4.5 v limited by package v gs = 10 v i d , drain current (a) t c , case temperature ( o c ) figure 11. 0.01 0.1 1 10 100 0.01 0.1 1 10 100 100 p s dc 100 ms 10 ms 1 ms 1s i d , drain current (a) v ds , drain to source voltage (v) this area is limited by r ds ( on ) single pulse t j = max rated r t ja = 151 o c/w t a = 25 o c 10s f o r w a r d b i a s s a f e operating area figure 12. 10 -4 10 -3 10 -2 10 -1 10 0 10 1 100 1000 0.5 1 10 100 1000 single pulse r t ja = 151 o c/w p ( pk ) , peak transient power (w) t, pulse width (sec) s i n g l e p u l s e m a x i m u m power dissipation typical characteristics (q1 n-channel) t j = 25 c unless otherwise noted
FDPC8013S powertrench ? power clip ?2012 fairchild semiconductor corporation FDPC8013S rev.c1 www.fairchildsemi.com 6 figure 13. 10 -4 10 -3 10 -2 10 -1 10 0 10 1 100 1000 0.001 0.01 0.1 1 2 single pulse r t ja = 151 o c/w (note 1b) duty cycle-descending order normalized thermal impedance, z t ja t, rectangular pulse duration (sec) d = 0.5 0.2 0.1 0.05 0.02 0.01 p dm t 1 t 2 notes: duty factor: d = t 1 /t 2 peak t j = p dm x z t ja x r t ja + t a junction-to- ambient transient thermal response curve typical characteristics (q1 n-channel) t j = 25 c unless otherwise noted
FDPC8013S powertrench ? power clip ?2012 fairchild semiconductor corporation FDPC8013S rev.c1 www.fairchildsemi.com 7 typical characteristics (q2 n-channel) t j = 25 o c unlenss otherwise noted 0.0 0.2 0.4 0.6 0.8 1.0 0 20 40 60 80 100 v gs = 3 v v gs = 3.5 v v gs = 10 v v gs = 6 v v gs = 4.5 v pulse duration = 80 p s duty cycle = 0.5% max i d , drain current (a) v ds , drain to source voltage (v) figure 14. on-region characteristics 020406080100 0 1 2 3 4 5 6 v gs = 3 v v gs = 4.5 v pulse duration = 80 p s duty cycle = 0.5% max normalized drain to source on-resistance i d , drain current (a) v gs = 3.5 v v gs = 6 v v gs = 10 v figure 15. normalized on-resistance vs drain current and gate voltage figure 16. normalized on-resistance vs junction temperature -75 -50 -25 0 25 50 75 100 125 150 0.6 0.8 1.0 1.2 1.4 1.6 i d = 26 a v gs = 10 v normalized drain to source on-resistance t j , junction temperature ( o c ) 24681 0 0 1 2 3 4 5 6 7 t j = 125 o c i d = 26 a t j = 25 o c v gs , gate to source voltage (v) r ds(on) , drain to source on-resistance ( m : ) pulse duration = 80 p s duty cycle = 0.5% max figure 17. on-resistance vs gate to source voltage figure 18. transfer characteristics 1.01.52.02.53.03.5 0 20 40 60 80 100 t j = 125 o c v ds = 5 v pulse duration = 80 p s duty cycle = 0.5% max t j = -55 o c t j = 25 o c i d , drain current (a) v gs , gate to source voltage (v) figure 19. source to drain diode forward voltage vs source current 0.0 0.2 0.4 0.6 0.8 1.0 0.001 0.01 0.1 1 10 100 t j = -55 o c t j = 25 o c t j = 125 o c v gs = 0 v i s , reverse drain current (a) v sd , body diode forward voltage (v)
typical characteristics (q2 n-channel) t j = 25 o c unlenss otherwise noted figure 20. gate charge characteristics 0 1020304050 0 2 4 6 8 10 i d = 26 a v dd = 20 v v dd = 10 v v gs , gate to source voltage (v) q g , gate charge (nc) v dd = 15 v 0.1 1 10 30 50 100 1000 10000 f = 1 mhz v gs = 0 v capacitance (pf) v ds , drain to source voltage (v) c rss c oss c iss figure 21. capacitance vs drain to source voltage f i g u r e 2 2 . u nc l a m pe d i nd uc t i v e sw itching capability 0.001 0.01 0.1 1 10 100 1000 1 10 100 t j = 100 o c t j = 25 o c t j = 125 o c t av , time in avalanche (ms) i as , avalanche current (a) figure 23. maximum continouns ( o c ) f i g u r e 2 4 . f o r w a r d b i a s s a f e operating area 0.01 0.1 1 10 100 0.01 0.1 1 10 100 200 100 p s dc 100 ms 10 ms 1 ms 1s i d , drain current (a) v ds , drain to source voltage (v) this area is limited by r ds ( on ) single pulse t j = max rated r t ja = 135 o c/w t a = 25 o c 10s figure 25. single pulse maximum power dissipation 10 -4 10 -3 10 -2 10 -1 10 0 10 1 100 1000 0.5 1 10 100 1000 3000 single pulse r t ja = 135 o c/w p ( pk ) , peak transient power (w) t, pulse width (sec) FDPC8013S powertrench ? power clip ?2012 fairchild semiconductor corporation FDPC8013S rev.c1 www.fairchildsemi.com 8
FDPC8013S powertrench ? power clip ?2012 fairchild semiconductor corporation FDPC8013S rev.c1 www.fairchildsemi.com 9 typical characteristics (q2 n-channel) t j = 25 o c unlenss otherwise noted figure 26. junction-to-ambient transient thermal response curve 10 -4 10 -3 10 -2 10 -1 10 0 10 1 100 1000 1e-4 1e-3 0.01 0.1 1 2 single pulse r ja = 135 o c/w (note 1b) duty cycle-descending order normalized thermal impedance, z ja t, rectangular pulse duration (sec) d = 0.5 0.2 0.1 0.05 0.02 0.01 p dm t 1 t 2 notes: duty factor: d = t 1 /t 2 peak t j = p dm x z ja x r ja + t a
FDPC8013S powertrench ? power clip ?2012 fairchild semiconductor corporation FDPC8013S rev.c1 www.fairchildsemi.com 10 syncfet tm schottky body diode characteristics fairchild?s syncfet tm process embeds a schottky diode in parallel with powertrench mosfet . this diode exhibits similar characteristics to a discrete exte rnal schottky diode in parallel with a mosfet. figure 27 shows the reverse recovery characteristic of the FDPC8013S. schottky barrier diodes exhibit significant leakage at high tem- perature and high reverse voltage. this will increase the power in the device. 100 150 200 250 300 350 400 -5 0 5 10 15 20 25 30 current (a) time (ns) di/dt = 300 a/ s 0 5 10 15 20 25 30 1 10 10 2 10 3 10 4 t j = 125 o c t j = 100 o c t j = 25 o c i dss , reverse leakage current (ua) v ds , reverse voltage (v) typical char acteristics (continued) figure 27. FDPC8013S syncfet tm body diode reverse recovery characteristic figure 28. syncfet tm body diode reverse leakage versus drain-source voltage
FDPC8013S powertrench ? power clip ?2012 fairchild semiconductor corporation FDPC8013S rev.c1 www.fairchildsemi.com 11 dimensional outlin e and pad layout
FDPC8013S powertrench ? power clip ?2012 fairchild semiconductor corporation FDPC8013S rev.c1 www.fairchildsemi.com 12 trademarks the following includes registered and unregistered trademarks and service marks, owned by fairchild semiconductor and/or its gl obal subsidiaries, and is not intended to be an exhaustive list of all such trademarks. *trademarks of system general corporation, used under license by fairchild semiconductor. disclaimer fairchild semiconductor reserves the right to make changes with out further notice to any products herein to improve reliability, function, or design. fairchild does not assume an y liability arising out of th e application or use of any product or circuit described herein; neither does it convey an y license under its patent rights, nor the rights of others. these specifications do not expand the terms of fairchild?s wo rldwide terms and conditions , specifically the warranty therein, which covers these products. life support policy fairchild?s products are not authorized fo r use as critical components in life support devices or systems without the express written approval of fa irchild semiconductor corporation. as used here in: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform w hen properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support, device, or system whose failure to perform can be reasonably ex pected to cause the failure of the life support device or system, or to affect its safety or effectiveness. product status definitions definition of terms 2cool? accupower? ax-cap?* bitsic ? build it now? coreplus? corepower? crossvolt ? ctl? current transfer logic? deuxpeed ? dual cool? ecospark ? efficentmax? esbc? fairchild ? fairchild semiconductor ? fact quiet series? fact ? fast ? fastvcore? fetbench? flashwriter ? * fps? f-pfs? frfet ? global power resource sm green bridge? green fps? green fps? e-series? g max ? gto? intellimax? isoplanar? marking small speakers sound louder and better? megabuck? microcoupler? microfet? micropak? micropak2? millerdrive? motionmax? motion-spm? mwsaver? optohit? optologic ? optoplanar ? powertrench ? powerxs? programmable active droop? qfet ? qs? quiet series? rapidconfigure? saving our world, 1mw/w/kw at a time? signalwise? smartmax? smart start? solutions for your success? spm ? stealth? superfet ? supersot?-3 supersot?-6 supersot?-8 supremos ? syncfet? sync-lock? ?* the power franchise ? ? tinyboost? tinybuck? tinycalc? tinylogic ? tinyopto? tinypower? tinypwm? tinywire? transic ? trifault detect? truecurrent ? * serdes? uhc ? ultra frfet? unifet? vcx? visualmax? voltageplus? xs? ? ? tm datasheet identification product status definition advance information formative / in design datasheet contains the design specifications for product development. specifications may change in any manner without notice. preliminary first production datasheet contains preliminary data; supplementary data will be published at a later date. fairchild semiconductor reserves the ri ght to make changes at any time without notice to improve design. no identification needed full production datasheet contains final specifications. fair child semiconductor reserves the right to make changes at any time without notice to improve the design. obsolete not in production datasheet contains specifications on a product t hat is discontinued by fairchild semiconductor. the datasheet is for reference information only. anti-counterfeiting policy fairchild semiconductor corporation?s anti-counterfeiting policy. fairchild?s anti-counterfeiting policy is also stated on our external website, www.fairchildsemi.com, under sales support . counterfeiting of semiconductor parts is a growing problem in th e industry. all manufactures of semiconductor products are expe riencing counterfeiting of their parts. customers who inadvertently purchase counterfeit parts ex perience many problems such as loss of brand reputation, substa ndard performance, failed application, and increased cost of production and manufacturing de lays. fairchild is taking strong measures to protect ourselve s and our customers from the proliferation of counterfeit parts. fairchild strongly encourages cu stomers to purchase fairchild parts either directly from fa irchild or from authorized fairchild distributors who are listed by country on our web page cited above. products customers buy either from fairchild directly or fr om authorized fairchild distributors are genuine parts, have full traceability, meet fairchild?s quality standards for handing and storage and provide access to fairchild?s full range of up-to-date technical and product information. fairchild and our authorized distributors will stand behind all warranties and wi ll appropriately address and warranty issues that may arise. fairchild will not provide any warranty coverage or other assistance for parts bought from unau thorized sources. fairchild is committed to combat this global problem and encourage our custom ers to do their part in stopping this practice by buying direct or from authorized distributors. rev. i61 tm ?

▲Up To Search▲

Price & Availability of FDPC8013S

	To Download FDPC8013S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .